Rockford Fosgate Punch Single 10" 300 Watt Amplified Subwoofer P300-10
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
FEATURES AT A GLANCE
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
High-efficiency, low current design
Thermal and over/under voltage protection
Intelligent auto turn on/off function
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)13.3 x 18 x D1 8.9 - D2 5.9 (in)
33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
FEATURES AT A GLANCE
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
High-efficiency, low current design
Thermal and over/under voltage protection
Intelligent auto turn on/off function
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)13.3 x 18 x D1 8.9 - D2 5.9 (in)
33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
FEATURES AT A GLANCE
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
High-efficiency, low current design
Thermal and over/under voltage protection
Intelligent auto turn on/off function
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)13.3 x 18 x D1 8.9 - D2 5.9 (in)
33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)